FANUC GE Fanuc CNC Parts, Service, Repair. Operators Manual for Mills. Alarm List and Description, ENP 16T/18T 16M/18M Parameter Manual. fanuc 18T. Hi I am a nebie to this form and I have hit a problem with the Okuma Howa 2sp 35 HG I have zeroed the work shift offset. fanuc 18t home position. my first post so be gentle!!! anyways we seem to have lost our home postion and the machine now considers its home.
|Published (Last):||18 August 2005|
|PDF File Size:||2.94 Mb|
|ePub File Size:||5.46 Mb|
|Price:||Free* [*Free Regsitration Required]|
I have the procedure of the machine builder which is straight forward enough but what am am looking for is are the postions in parameter 1st refererence position going to change or are they famuc for reference???? Let us know what the settings of parameter are set to and this will tell us a few things along with giving us a bit of history as to what happened.
Do you have 1. All I have is the list of optional parameters, not the total parameter list book. Depends on where the Tool is, in relation to the home position. You can reset the home position by blinking The machine was not set this way from the factory, so we changed famuc in hopes of making it easier to run two sided parts within one program without having to change the offset mid-program using a G And I do appreciate any help or advice you can give. For example, if G54 Z is set to 0.
Can someone please help clear this up for me.
Wear offsets also all zeroes. PM me your email address and I will dig up 18tt manuals for you. Were you there or is an operator trying to lie his fajuc out of something or did not understand what happened? Ultimately, we are trying to set the work coordinate systems in the programs using G10s, which will work right now. Fanuc 18T work offset measure help. Thanks in advance fanuuc any help!!! Do I need to call up the machine coordinate system before setting the work coordinate offset?
I don’t quite understand your expectations that this spot should be ZERO. Possible guy keyed G50 how to check? What is parameter set to?
G10 P0 X0 Z0 and see what that does for you I know he was trying to get it to run in MIDI but not sure what he did.
Tags for this Thread mid-programnotsaywithin.
Something happened, regardless I would turn my rapids waaaay down, next time you cycle the 18r. Here is pic off geometry offset page, all zeroes.
If not, then any chance someone keyed in G50 Z1.? The G54 and Common offsets are global and active at power up or reset. Measure again and it changes to 3.
The fact the error is a perfectly round number tells me it was an operator MDI input error or a programming error, nothing to so with the hardware or software of the machine. From your first pic hit the “ALL” soft key and let us have a look at a pic of that.
Or you could put it where you want Z0 to be and re-set your G The reason this parameter is nice to use is because you can setup an easily identifiable position that the program runs to. But now it’s not?
All times are GMT fqnuc As for parameter you can set this to whatever you want to have as your home position. Tags for this Thread axisbackbobfanuchome. Go back to Can someone tell me how to get it back to 0? It sounds to me like you have ABS encoders and someone did not set the home position backup properly. Does anyone know if there is a parameter that changes the mode of the measure key from incremental to absolute?
Results 1 to 15 of Move the axis towards -VE directionthan refrence the axis The problem is solved.
The time now is Results 1 to 5 of 5. Login to Your Account. The opinions in this post are my own and not those of machinetoolhelp. After a couple hours it was apparent that he was bser so asked him to leave.
G54 is typically default on the fanuc controls so fanuf if you press reset G54 is still going to be active. Hello, We just changed our machine to accept work coordinates as opposed to just using the work shift offsets. Don’t wanna do something without having all the info first!!! I know this post is super old so hopefully someone sees this.
Said he knew all about it. The way it is currently working, there is ample opportunity to change the work offset and not realize it, thus producing a large oops! Also when I Goto offset menu and scroll, no where does it say G Move the fahuc to where you want home to be Turn Parameter Write Enable on in the Offset screen Go to Parameters in the System screen, go down to the Z axis row of parameter